Household electric kettle background household electric kettle repair steps

When we want to have a cup of tea in the summer, we have to use a electric kettle to burn a pot of water. Then wait for a while, the water will open, then do you have the same experience? In the use of household electric kettle, we found that only a little bit of boiling water can be burned, but for those who are eager to drink tea, it may be enough The urgent need to solve the eyebrows, then Xiaobian will take everyone to look at the exciting content of the household electric kettle.

First, the background

In this era of many home appliances, almost every household has an electric kettle. Because it is small in size, fast in boiling water, and cheap, it can be bought from 30 to 100 yuan. However, the premise of its high efficiency is that the power is large, generally more than 1 kW, and many parts are fully loaded when boiling water. So it is easier and worse. It is not worthwhile to get the repair shop to repair the manual fee than the pot. It’s a pity that it’s not worth the money. Now let's learn to repair it by hand and let it continue to serve us.

Second, the method steps

1. First of all, we can easily judge whether it can be repaired from the appearance of the electric kettle. If the appearance is intact, there is no obvious burning deformation, and generally it can be repaired. This situation is due to the fact that the current is too large when boiling water, and the switch contacts are caused by black carbon deposits. This kind of problem is also relatively simple to repair. Just disassemble and simply handle the switch contacts. Ok! Let's get started! Prepare the necessary tools first.

2. There is a Phillips screw at the bottom of the handle. Use a Phillips screwdriver to reverse the screw.

3, a friend feels strange, the screws are screwed out why the handle is still not open? In fact, there are two dark buckles in the middle of the handle, only after hooking out to see, just in the figure below .

4. When opening the handle, you can't start from the dark buckle. Because the buckle is too tight, use your fingers to start the hook from the bottom of the handle. When the bottom is about one centimeter, move it to the left and right and the dark button will open.

5, the problem is there on the switch on the handle, there are two copper contacts under the switch button, the state is usually black, because the current is too large when the kettle is boiled, the switch contacts heat up Black, producing a layer of carbon that is not electrically conductive.

6. Turn the switch up to the state of boiling water, just scrape off the carbon deposit carefully with a knife. Then put the handle back and you're done. Put the kettle back on the base to burn the water. At this time, if you have Tieguanyin in your home, you can take a little out and rely on yourself.

Third, matters needing attention

When you try to burn the water, you must remember to add water to the pot. Otherwise, you will be excited when you burn it.

The above content is the introduction of the relevant content of the household electric kettle. I hope that readers will be able to see and hear, and you will benefit from the application in real life. Well, today's introduction to the household electric kettle is here. Thanks to the readers for reading this article and for the support and love of Xiaobian. If you want to get more home decoration information, please continue to pay attention to the decoration home. network.

More related wonderful reading:

The danger of scale in the hot water bottle The use of electric kettle detergent

How about the hemisphere electric kettle? Hemisphere electric kettle introduction

Large-capacity electric kettle brand large-capacity electric kettle purchase tips

How to fix the electric kettle? Electric kettle maintenance method

Folding electric kettle brand folding electric kettle purchase tips

Is the electric kettle good? Electric kettle advantages and purchase tips